DoubleHard sierras cinta de alta aleación

A partir de MXN$6,000.00
Disponible
Sólo queda %1

DoubleHard es una sierra duradera, de multiuso para cortar maderas de todos tipos como madera blanda, dura, con muchos ojos, y hasta madera congelada.

Beneficios
  • 2 Circular Blades. 1 Adjustable Blade.
Descripción DoubleHard sierras cinta de alta aleación

Manufactured from carbon steel, SilverTip sawmill blades can be used on both portable and industrial sawmills and is also suitable for horizontal resaws. Carbon is the most common steel used in narrow-band sawing and can be resharpened, but typically not as often as a blade made with high-alloy steel.

  • Width 1", 1.125", 1.25", 1.5", 1.75", 2", 3"
  • Thickness .035, .038, .042, .045, .050, .055
  • Softer than "high-alloy steel"
  • Typically not resharpened on horizontal resaws using narrow widths (1", 1.125")


Sawmill Blade Selection Guide

Wood-Mizer Sawmill Blades
From green softwoods to abrasive hardwoods, Wood-Mizer manufactures an extensive range of sawmill blades with more than 100 combinations based on profile, width, thickness, tooth spacing, and alloy for any type of sawing or resawing application. Each Wood-Mizer sawmill blade tooth is precisely set by computer-controlled equipment and completely profile ground tip to tip using super abrasive CBN grinding technology to ensure the highest quality blade performance. Made in the USA, all Wood-Mizer blades are quality checked for performance throughout more than 100 tests and inspections from the selection of raw materials to the final grind. Count on Wood-Mizer sawmill and resaw bandsaw blades for unmatched quality, accuracy, and performance across the board.


DoubleHard Bandsaw Blades
DoubleHard’s original blade material is manufactured from high-alloy steel and is designed for portable and industrial sawmill equipment. With the combination of harder high-alloy steel and induction hardened teeth, DoubleHard blades deliver twice the toughness and twice the sharp life compared to standard carbon blades and can be resharpened several times with a CBN grinding wheel. DoubleHard sawmill blades are durable all-purpose blades for sawing softwoods, hardwoods, knotty woods, and frozen woods.
SilverTip Bandsaw Blades
Manufactured from carbon steel, SilverTip blades can be used on both portable and industrial sawmills and is also suitable for horizontal resaws. Carbon is the most common steel used in narrow-band sawing and can be resharpened with a CBN grinding wheel, but typically not as often as a blade made with harder high-alloy steel like DoubleHard blades. SilverTip sawmill blades are ideal for economical sawing, primary and secondary breakdown as well as for high volume sawing environments.
BiMetal Bandsaw Blades
BiMetal is made from high-alloy two piece steel with a wire-welded, hardened tooth tip. Generally used for primary breakdown sawing in portable or industrial sawmill operations, BiMetal blades hold a sharpened edge up to three times longer than carbon blades and can be resharpened multiple times with a CBN grinding wheel. BiMetal sawmill blades offer a longer sawing sharp life than most carbon and high-alloy blades and are engineered for production sawing environments.
RazorTip Bandsaw Blades
RazorTip Carbide blades utilize a very hard triple chip tooth configuration with an alternating carbide-tipped raker tooth that can withstand the hardest of hardwoods and provide a very smooth finish. A diamond grinding wheel is required for sharpening due to the extreme hardness of the carbide material. RazorTip Carbide sawmill blades are tough and stay sharper longer in the most difficult sawing conditions such as tropical hardwoods, kiln dried lumber, engineered wood, and more abrasive materials.

Sawmill Blade Guide

A. Tooth Spacing is the distance between each tooth from one tip to another. Shorter tooth spacing (1/2", 5/8", 3/4", and 7/8") is generally used for low horsepower sawing (24HP or less), secondary processing, and resawing, while wider tooth spacing (1” and 1-1/4”) is ideal for high production, high horsepower (25HP or more) operations.

B. Gullet is the area between teeth that captures and removes sawdust while providing strength in the tooth. The tooth height must be tall enough to allow the gullet to carry out sawdust from the cut.

C. Tooth Height is the distance from the lowest point of the gullet to the highest tip of the tooth. Taller teeth (4°, 7°, and Turbo 7° hook angle) provide more performance in higher horsepower (25HP or more) with increased sawdust removal. Shorter teeth (9° and 10° hook angle) are better for lower horsepower (24HP or less), small log diameter sawing, resawing, and secondary processing.

D. Hook Angle is the number of degrees that the tooth face leans forward of 90 degrees. The hook angle should be chosen based on the type of wood you are sawing.

  • 4° - Lowest hook angle for sawing frozen, dense hardwoods and knotty softwoods.
  • 7° - Solid, all-around profile with a good gullet capacity for higher horsepower (25HP or more) sawing in hardwoods.
  • Turbo 7 - Only available from Wood-Mizer, this high performing profile with an aggressive 39° back angle is engineered specifically for extreme and exotic hardwoods when sawing with higher horsepower (25HP or more) equipment.
  • Turbo 747 – Only available from Wood-Mizer, this profile is compatible with all horsepower levels and features a deeper capacity gullet for increased sawdust removal, extreme 47° back angle for faster sawing speeds, and sharp penetrating points for increased sawing accuracy.
  • 9° - Ideal blade for lower horsepower (24HP or less) sawing frozen wood, hardwood, and small diameter logs.
  • 10° - Very popular all-purpose blade for all horsepower levels sawing mixed hardwoods such as red oak, cherry, walnut, soft maple, and poplar.
  • Vortex™ - Only available from Wood-Mizer, this unique dust-removal profile has more gullet capacity to remove sawdust from the board.


E. Tooth Set
is the distance the tooth is bent beyond the body or raker tooth of the blade. Tooth set clears a path in the wood for the body of the blade which is measured by kerf or the total amount of wood removed by the blade with each pass. Wood-Mizer thin kerf blades remove less than 1/10” which produces about 20% more boards per log than circle mills or chainsaws.

F. Blade Width is the distance between the tip and base of the blade. Wider blades (1-1/2" to 2") are designed for higher horsepower (25HP or more) sawmills, provide a faster feed rate, and are able to be resharpened more. Narrow blades (1- 1/4" to 1-1/2") are for lower horsepower sawmills (24HP or less) and more difficult sawing.

G. Blade Thickness is the thickness of the blade. Thicker blades (.045", .050", .055") provide faster feed rates and better cutting performance in difficult sawing conditions such as knotty, frozen, dry or extremely hard material, but requires higher horsepower (25HP or more). Thinner blades (.035", .038", .042") provide longer flex life with lower horsepower sawmills (24HP or less) where production or speed is not a primary factor.

Las sierras DoubleHard reciben este nombre porque Wood-Mizer comienza con una aleación de acero de alta calidad y posteriormente los dientes son endurecidos mediante un proceso de inducción para ofrecerle una sierra dos veces más resistente y duradera. De hecho, las sierras DoubleHard tienen el doble de vida tras cada afilado que la mayoría de las sierras estándar.

Las sierras DoubleHard de Wood-Mizer son resistentes, no se quiebran y no se astillan ni se desgastan de forma prematura. Durante el proceso de fabricación, cada diente se mide y se configura de forma individual mediante un sistema informatizado.

Las sierras DoubleHard de Wood-Mizer están disponibles en una gran variedad de anchuras, espesores y perfiles, para adaptarse tanto a las aplicaciones más comunes como a las necesidades de corte más especializadas. Disponemos de sierras de cualquier longitud, y si no las tenemos en stock, las fabricaremos según sus necesidades.

La gama de sierras DoubleHard de Wood-Mizer ofrece una flexibilidad de corte inigualable para cortar maderas congeladas, blandas, duras o nudosas, o bien en situaciones en las que el corte es un factor crítico.

Read More
Solicitar Cotizacion DoubleHard sierras cinta de alta aleación
Suscríbase para recibir nuestro boletín informativo.
Manténgase al día con las últimas noticias de nuestros productos, promociones, clientes destacados y más con nuestro boletín informativo. ¡Regístrate hoy!
WA button WA button